 ************************************************************************
 **                                                                    **
 **                         Package Description                        **
 **                                                                    **
 **                    FUJITSU  MOWare(TM)  MOWorks                    **
 **          For  DOS/Windows 3.1, Windows for Workgroups 3.11         **
 **                                                    Version 1.21    **
 **                          For PC/AT compatibles                     **
 **                       MODISKAP.SYS      Ver 1.77                   **
 **                       FJFDISK.EXE       Ver 2.06                   **
 **                       MOFORMAT.EXE      Ver 1.73                   **
 **                       REMOUT.EXE        Ver 1.00                   **
 **                                        (Revised : March 13, 1998)  **
 ************************************************************************
  All Rights Reserved and Copyright(C) Fujitsu Limited 1996-1998

Table of Contents
=================
1. Preface

2. Contents of the package

3. Notes and Restrictions
  3.1 Notes
  3.2 Restrictions

4. Trademark and Attention



1.  Preface
===========
Thank you for purchasing the Fujitsu ATAPI magneto-optical (MO) disk drive.
The device drivers and other programs included with this package simplify 
the use of this MO disk drive in a DOS 5.x/6.x, Windows 3.1 or Windows for
Workgroups 3.11(WFW 3.11) environment.
This package supports the FUJITSU M25-MCA3064AP(128/230/540/640 MB) MO disk 
drive.



2.  Contents of the package
===========================

README.TXT            The file you are reading now.
SETUP.EXE             Installer for Windows.
SETUP.INS             Data file for installer for Windows.
SETUP.INI             Data file for the installer for Windows. 
_INST16.EX_           This file is used by the installer for Windows. 
_ISDEL.EXE            This file is used by the installer for Windows. 
_SETUP.DLL            Information for the installer for Windows.
_SETUP.LIB            Information for the installer for Windows.
MOFORMAT.EXE          Formatter for Windows.
FJDISK.DLL            This file is used by the Moformatter for Windows. 
FW15.DLL              This file is used by the Moformatter for Windows. 
MOFORMAT.HLP          Instructions for the Moformatter for Windows.
REMOUT.EXE            Uninstaller for Windows.
REMOUT.INI            Data file for uninstaller for Windows.
REMOUT.HLP            Instructions for uninstaller for Windows.  
\DOS + MODISKAP.SYS   Device driver.
     + MODISKAP.TXT   Instructions for the device driver for DOS.
     + FJFDISK.EXE    Formatter for DOS.
     + FJFDISK.TXT    Instructions for the formatter for DOS.
     + INSTALL.EXE    Installer for DOS. 
     + INSTALL.MSG    This file is used by the installer for DOS.
     + INSTALL.GID    Quick reference shown by the installer.


        <<Before installing the package, read the notes below.>>

3.  Notes and Restriction
=========================
3.1  Notes
----------
(1) Do not use other device drivers for M25-MCA3064AP(128/230/540/640 MB) MO 
    disk drive.

(2) To format an MO disk, use the attached "FJFDISK.EXE" for DOS or  
    "MOFORMAT.EXE " for Windows 3.1 (or WFW 3.11).
    See Section 3.2 below for the DOS format command(format.com) restrictions.

(3) The "Copy Disk" and "Format Disk" commands in the DISK menu of the Windows
    3.1 (or WFW 3.11) File Manager cannot be used for MO disks.

(4) Note that no error message is displayed and no operation is performed on the 
    disk if a file of 512-byte or less is written, or an attempt is made to 
    create a 
    directory on a write-protected disk under the Windows 3.1 (or WFW 3.11) 
    environment.

(5) Utilities that rewrite the boot sector cannot be used on 640MB disks.


3.2  Restrictions (on the DOS FORMAT Command)
---------------------------------------------
(1) The DOS FORMAT command(FDISK.EXE/FORMAT.COM) does not support 640MB disks.
     Use the Fujitsu MO formatter (FJFDISK.EXE/MOFORMAT.EXE) which supports 128/
     230/540/640MB disks.

(2) When the FORMAT.COM is used, two or more disks cannot be formatted 
    successively if they are of different capacities or formats.  The Formatting 
    program should be terminated each time after formatting is complete.
    After formatting is complete, the following message is displayed:
    "Format another (Y/N)?"
    Select "n" to terminate the program then run the program again to format 
    another disk.

(3) If HDD is connected to primary master, in general you shouldn't put ATAPI
    MO drives than HDD in primary slave port. We recommend that you should 
    use ATAPI MO in secondary ports under windows 3.1.

4.  Trademark and Attention
===========================
This product may not be copied or modified without the prior permission of 
Fujitsu.  
No part of this document may be reproduced in any form or by any means without
the prior permission of Fujitsu.
MS-DOS and Windows are registered trademarks of US Microsoft Corporation in 
the United States and other countries.

